This document covers some general concepts and conventions used by AutoHotkey, with focus on explanation rather than code. The reader is not assumed to have any prior knowledge of scripting or programming, but should be prepared to learn new terminology.
For more specific details about syntax, see Scripting Language.
A value is simply a piece of information within a program. For example, the name of a key to send or a program to run, the number of times a hotkey has been pressed, the title of a window to activate, or whatever else has some meaning within the program or script.
AutoHotkey supports these types of values:
Some other related concepts:
A string is simply text. Each string is actually a sequence or string of characters, but can be treated as a single entity. The length of a string is the number of characters in the sequence, while the position of a character in the string is merely that character's sequential number. By convention in AutoHotkey, the first character is at position 1.
Numeric strings: A string of digits (or any other supported number format) is automatically interpreted as a number when a math operation or comparison requires it. In AutoHotkey v1, comparisons are performed numerically if both values are numeric even if both values are strings. However, a quoted string (or the result of concatenating with a quoted string) is never considered numeric when used directly in an expression.
How literal text should be written within the script depends on the context. For details, see Legacy Syntax and Strings (in expressions).
For a more detailed explanation of how strings work, see String Encoding.
AutoHotkey supports these number formats:
123, 00123 or -1.0x7B, 0x007B or -0x1.3.14159.Hexadecimal numbers must use the 0x or 0X prefix, except where noted in the documentation. This prefix must be written after the + or - sign, if present, and before any leading zeroes. For example, 0x001 is valid, but 000x1 is not.
Numbers written with a decimal point are always considered to be floating-point, even if the fractional part is zero. For example, 42 and 42.0 are usually interchangeable, but not always. Scientific notation is also recognized, but only if a decimal point is present (e.g. 1.0e4 and -2.1E-4).
The decimal separator is always a dot, even if the user's regional settings specify a comma.
When a number is converted to a string, it is formatted according to the current integer or float format. Although the SetFormat command can be used to change the current format, it is usually better to use the Format function to format a string. Floating-point numbers can also be formatted by using the Round function.
For details about the range and accuracy of numeric values, see Pure Numbers.
A boolean value can be either true or false. Boolean values are used to represent anything that has exactly two possible states, such as the truth of an expression. For example, the expression (x <= y) is true when x has lesser or equal value to y. A boolean value could also represent yes or no, on or off, down or up (such as for GetKeyState) and so on.
AutoHotkey does not have a specific boolean type, so it uses the integer value 0 to represent false and 1 to represent true. When a value is required to be either true or false, a blank or zero value is considered false and all other values are considered true. (Objects are always considered true.)
단어 true와 false는 내장 변수로서 각각 1과 0을 담고 있습니다. They can be used to make a script more readable.
AutoHotkey does not have a value which uniquely represents nothing, null, nil or undefined, as seen in other languages. Instead, an empty string (a string of zero length) often has this meaning.
If a variable or parameter is said to be "empty" or "blank", that usually means an empty string (a string of zero length).
There are generally two ways of viewing objects:
The proper use of objects (and in particular, classes) can result in code which is modular and reusable. Modular code is usually easier to test, understand and maintain. For instance, one can improve or modify one section of code without having to know the details of other sections, and without having to make corresponding changes to those sections. Reusable code saves time, by avoiding the need to write and test code for the same or similar tasks over and over.
When you assign an object to a variable, as in myObj := {}, what you store is not the object itself, but a reference to the object. Copying that variable, as in yourObj := myObj, creates a new reference to the same object. A change such as myObj.ans := 42 would be reflected by both myObj.ans and yourObj.ans, since they both refer to the same object. However, myObj := Object() only affects the variable myObj, not the variable yourObj, which still refers to the original object.
This section builds on these concepts which are covered in later sections: variables, functions
Objects work through the principle of message passing. You don't know where an object's code or variables actually reside, so you must pass a message to the object, like "give me foo" or "go do bar", and rely on the object to respond to the message. Objects in AutoHotkey support the following basic messages:
:=.().Each message can optionally have one or more parameters (and, for Set, the value). Usually there is at least one parameter, and it is interpreted as the name of a property or method, a key or an array index, depending on the object and how you're using it. The parameters of a message are specified using three different patterns: .Name, [Parameters] and (Parameters), where Name is a literal name or identifier, and Parameters is a list of parameters (as sub-expressions), which can be empty/blank ([] or ()).
For Get and Set, .Name and [Parameters] can be used interchangeably, or in combination:
myObj[arg1, arg2, ..., argN] myObj.name myObj.name[arg2, ..., argN]
For Call, .Name and [Parameter] can be used interchangeably, and must always be followed by (Parameters):
myObj.name(arg2, ..., argN) myObj[arg1](arg2, ..., argN)
Notice that if name is present, it becomes the first parameter. myObj.name is equivalent to myObj["name"], while myObj.123 is equivalent to myObj[123]. This is true for every type of object, so it is always possible to compute the name of a property or method at runtime, rather than hard-coding it into the script.
Although name or arg1 is considered to be the first parameter, remember that these are just messages, and the object is free to handle them in any way. In a method call such as those shown above, usually the object uses name or arg1 to identify which method should be called, and then only arg2 and beyond are passed to the method. In effect, arg2 becomes the method's first apparent parameter.
Generally, Set has the same meaning as an assignment, so it uses the same operator:
myObj[arg1, arg2, ..., argN] := value myObj.name := value myObj.name[arg2, ..., argN] := value
Currently there is also a "hybrid" syntax allowed with Set, but it is best not to use it:
myObj.name(arg2, ..., argN) := value
Technically, value is passed as the last the parameter of the Set message; however, this detail is almost never relevant to script authors. Generally one can simply think of it as "the value being assigned".
A variable allows you to use a name as a placeholder for a value. Which value that is could change repeatedly during the time your script is running. For example, a hotkey could use a variable press_count to count the number of times it is pressed, and send a different key whenever press_count is a multiple of 3 (every third press). Even a variable which is only assigned a value once can be useful. For example, a WebBrowserTitle variable could be used to make your code easier to update when and if you were to change your preferred web browser, or if the title or window class changes due to a software update.
In AutoHotkey, variables are created simply by using them. Each variable is not permanently restricted to a single data type, but can instead hold a value of any type: string, number or object. Each variable starts off empty/blank; in other words, each newly created variable contains an empty string until it is assigned some other value.
A variable has three main aspects:
Certain restrictions apply to variable names - see Names for details. In short, it is safest to stick to names consisting of ASCII letters (which are case insensitive), digits and underscore, and to avoid using names that start with a digit.
A variable name has scope, which defines where in the code that name can be used to refer to that particular variable; in other words, where the variable is visible. If a variable is not visible within a given scope, the same name can refer to a different variable. Both variables might exist at the same time, but only one is visible to each part of the script. Global variables are visible in the "global scope" (that is, outside of functions), but must usually be declared to make them visible inside a function. Local variables are visible only inside the function which created them.
A variable can be thought of as a container or storage location for a value, so you'll often find the documentation refers to a variable's value as the contents of the variable. For a variable x := 42, we can also say that the variable x has the number 42 as its value, or that the value of x is 42.
It is important to note that a variable and its value are not the same thing. For instance, we might say "myArray is an array", but what we really mean is that myArray is a variable containing a reference to an array. We're taking a shortcut by using the name of the variable to refer to its value, but "myArray" is really just the name of the variable; the array object doesn't know that it has a name, and could be referred to by many different variables (and therefore many names).
To initialise a variable is to assign it a starting value. Although the program automatically initialises all variables (an empty string being the default value), it is good practice for a script to always initialise its variables before use. That way, anyone reading the script can see what variables the script will be using and what starting values they are expected to have.
It is usually necessary for the script to initialise any variable which is expected to hold a number. For example, x := x + 1 will not work if x has never been assigned a value, since the empty string is considered to be non-numeric. The script should have assigned a starting value, such as x := 0. There are some cases where empty values are assumed to be 0, but it is best not to rely on this.
IsSet can be used to determine whether a variable has been initialized, such as to initialize a global or static variable on first use.
Script authors can use the #Warn directive to help find instances where a variable is used without having been initialised by the script.
A number of useful variables are built into the program and can be referenced by any script. Clipboard, ErrorLevel, 그리고 명령줄 매개변수는 제외하고, 이런 변수들은 읽기 전용입니다; 즉, 스크립트가 그 내용을 직접적으로 바꿀 수 없습니다. By convention, most of these variables start with the prefix A_, so it is best to avoid using this prefix for your own variables.
Some variables such as A_KeyDelay and A_TitleMatchMode represent settings that control the script's behavior, and retain separate values for each thread. This allows subroutines launched by new threads (such as for hotkeys, menus, timers and such) to change settings without affecting other threads.
Some special variables are not updated periodically, but rather their value is retrieved or calculated whenever the script references the variable. For example, Clipboard retrieves the current contents of the clipboard as text, and A_TimeSinceThisHotkey calculates the number of milliseconds that have elapsed since the hotkey was pressed.
관련 항목: list of built-in variables.
환경 변수는 운영 체제가 관리합니다. 명령어 프롬프트에서 SET을 타자하고 엔터를 치면 그 목록을 보실 수 있습니다.
스크립트는 EnvSet으로 새 환경 변수를 만들거나 기존의 변수 내용을 바꿀 수 있습니다. Such additions and changes are not seen by the rest of the system. However, any programs or scripts which the script launches by calling Run or RunWait usually inherit a copy of the parent script's environment variables.
It is recommended that all new scripts retrieve environment variables such as Path via EnvGet:
EnvGet, OutputVar, Path ; For explanation, see #NoEnv.
If a script lacks the #NoEnv directive, reading an empty variable will instead return the value of the environment variable with that name, if there is one. This can cause confusion, so it is recommended that all new scripts use #NoEnv.
Although a variable is typically thought of as holding a single value, and that value having a distinct type (string, number or object), AutoHotkey automatically converts between numbers and strings in cases like myString + 1 and MsgBox %myNumber%. As these conversions can happen very frequently, whenever a variable is converted, the result is cached in the variable.
In effect, a variable can contain both a string and a number simultaneously. Usually this just improves the script's performance with no down-sides, but if a variable contains both a number and a string, is it number, or is it a string? This ambiguity causes unexpected behavior in at least two cases:
SetFormat's slow mode forces the assignment of a pure number to immediately convert that number to a string. For integers, the number is also stored, so this doesn't have adverse effects other than to performance. For floats, the number is not stored, since SetFormat affects the precision of the value, possibly even truncating all decimal places. In other words, SetFormat's slow mode prevents pure floats from being stored in variables.
Taking the address of a variable effectively converts the variable's value to a string, disabling caching until the variable's address changes (this happens when its capacity changes). This is both for backward-compatibility and because the script could change the value indirectly via its address at any time, making the cache inaccurate.
A function or command is the basic means by which a script does something.
In essence, functions and commands are the same thing, so the concepts explained here apply to both. However, the long history of AutoHotkey v1 and an emphasis on backward-compatibility have resulted in a divide between commands, which require legacy syntax, and functions, which require expression syntax.
Commands and functions can have many different purposes. Some functions might do no more than perform a simple calculation, while others have immediately visible effects, such as moving a window. One of AutoHotkey's strengths is the ease with which scripts can automate other programs and perform many other common tasks by simply calling a few functions. See the command and function list for examples.
Throughout this documentation, some common words are used in ways that might not be obvious to someone without prior experience. Below are several such words/phrases which are used frequently in relation to functions and commands:
Calling a function or command causes the program to invoke, execute or evaluate it. In other words, a function call temporarily transfers control from the script to the function. When the function has completed its purpose, it returns control to the script. In other words, any code following the function call does not execute until after the function completes.
However, sometimes a function or command completes before its effects can be seen by the user. For example, the Send command sends keystrokes, but may return before the keystrokes reach their destination and cause their intended effect.
Usually a command or function accepts parameters which tell it how to operate or what to operate on. Each parameter is a value, such as a string or number. For example, WinMove moves a window, so its parameters tell it which window to move and where to move it to. Parameters can also be called arguments. Common abbreviations include param and arg.
Parameters are passed to a function or command, meaning that a value is specified for each parameter of the function or command when it is called. For example, one can pass the name of a key to GetKeyState() to determine whether that key is being held down.
Functions return a value, so the result of the function is often called a return value. For example, StrLen() returns the number of characters in a string. Commands do not return a result directly; instead, they store the result in a variable. Functions may also do this, such as when there is more than one result.
Functions and commands usually expect parameters to be written in a specific order, so the meaning of each parameter value depends on its position in the comma-delimited list of parameters. Some parameters can be omitted, in which case the parameter can be left blank, but the comma following it can only be omitted if all remaining parameters are also omitted. For example, the syntax for ControlSend is:
ControlSend , Control, Keys, WinTitle, WinText, ExcludeTitle, ExcludeText
Square brackets signify that the enclosed parameters are optional (the brackets themselves should not appear in the actual code). However, ControlSend isn't useful unless Keys are specified, and usually one must also specify the target window. 예를 들어:
ControlSend, Edit1, ^{Home}, A ; Correct. Control is specified.
ControlSend, ^{Home}, A ; Incorrect: Parameters are mismatched.
ControlSend,, ^{Home}, A ; Correct. Control is omitted.
Methods are functions which operate on a particular object. While there can only be one function named Send (for example), there can be as many methods named Send as there are objects, as each object (or class of objects) can respond in a different way. For this reason, the target object (which may be a variable or sub-expression) is specified to left of the method name instead of inside the parameter list. For details, see Object Protocol.
Control flow is the order in which individual statements are executed. Normally statements are executed sequentially from top to bottom, but a control flow statement can override this, such as by specifying that statements should be executed repeatedly, or only if a certain condition is met.
A statement is simply the smallest standalone element of the language that expresses some action to be carried out. In AutoHotkey, statements include commands, assignments, function calls and other expressions. However, directives, labels (including hotkeys and hotstrings), and declarations without assignments are not statements; they are processed when the program first starts up, before the script executes.
Carry out, perform, evaluate, put into effect, etc. Execute basically has the same meaning as in non-programming speak.
The body of a control flow statement is the statement or group of statements to which it applies. For example, the body of an if statement is executed only if a specific condition is met.
For example, consider this simple set of instructions:
We take one step at a time, and when that step is finished, we move on to the next step. In the same way, control in a program or script usually flows from one statement to the next statement. But what if we want to type into an existing Notepad window? Consider this revised set of instructions:
So we either open Notepad or activate Notepad depending on whether it is already running. #1 is a conditional statement, also known as an if statement; that is, we execute its body (#1.1 - #1.2) only if a condition is met. #2 is an else statement; we execute its body (#2.1) only if the condition of a previous if statement (#1) is not met. Depending on the condition, control flows one of two ways: #1 (if true) → #1.1 → #1.2 → #3; or #1 (if false) → #2 (else) → #2.1 → #3.
The instructions above can be translated into the code below:
if (not WinExist("ahk_class Notepad"))
{
Run Notepad
WinWait ahk_class Notepad
}
else
WinActivate ahk_class Notepad
Send Hello`, world{!}
In our written instructions, we used indentation and numbering to group the statements. Scripts work a little differently. Although indentation makes code easier to read, in AutoHotkey it does not affect the grouping of statements. Instead, statements are grouped by enclosing them in braces, as shown above. This is called a block.
For details about syntax - that is, how to write or recognise control flow statements in AutoHotkey - see Control Flow.
Each character in the string is represented by a number, called its ordinal number, or character code. For example, the value "Abc" would be represented as follows:
| A | b | c | |
| 65 | 98 | 99 | 0 |
Encoding: The encoding of a string defines how symbols are mapped to ordinal numbers, and ordinal numbers to bytes. There are many different encodings, but as all of those supported by AutoHotkey include ASCII as a subset, character codes 0 to 127 always have the same meaning. For example, 'A' always has the character code 65.
Null-termination: Each string is terminated with a "null character", or in other words, a character with binary value zero marks the end of the string. The length of the string does not need to be stored as it can be inferred by the position of the null-terminator. For performance, AutoHotkey sometimes also stores the length, such as when a string is stored in a variable.
Note: Due to reliance on null-termination, AutoHotkey v1 does not generally support strings with embedded null characters. Such strings can be created with VarSetCapacity() and NumPut() or DllCall(), but may produce inconsistent results.
Native encoding: Although AutoHotkey provides ways to work with text in various encodings, the built-in commands and functions--and to some degree the language itself--all assume string values to be in one particular encoding. This is referred to as the native encoding. The native encoding depends on the version of AutoHotkey:
Unicode versions of AutoHotkey use UTF-16. The smallest element in a UTF-16 string is two bytes (16 bits). Unicode characters in the range 0 to 65535 (U+FFFF) are represented by a single 16-bit code unit of the same value, while characters in the range 65536 (U+10000) to 1114111 (U+10FFFF) are represented by a surrogate pair; that is, exactly two 16-bit code units between 0xD800 and 0xDFFF. (For further explanation of surrogate pairs and methods of encoding or decoding them, search the Internet.)
ANSI versions of AutoHotkey use the system default ANSI code page, which depends on the system locale or "language for non-Unicode programs" system setting. The smallest element of an ANSI string is one byte. However, some code pages contain characters which are represented by sequences of multiple bytes (these are always non-ASCII characters).
Character: Generally, other parts of this documentation use the term "character" to mean a string's smallest unit; bytes for ANSI strings and 16-bit code units for Unicode (UTF-16) strings. For practical reasons, the length of a string and positions within a string are measured by counting these fixed-size units, even though they may not be complete Unicode characters.
FileRead, FileAppend, FileOpen() and the File object provide ways of reading and writing text in files with a specific encoding.
The functions StrGet and StrPut can be used to convert strings between the native encoding and some other specified encoding. However, these are usually only useful in combination with data structures and the DllCall function. Strings which are passed directly to or from DllCall() can be converted to ANSI or UTF-16 by using the AStr or WStr parameter types.
Techniques for dealing with the differences between ANSI and Unicode versions of AutoHotkey can be found under Unicode vs ANSI.
A pure or binary number is one which is stored in memory in a format that the computer's CPU can directly work with, such as to perform math. In most cases, AutoHotkey automatically converts between numeric strings and pure numbers as needed, and rarely differentiates between the two types. AutoHotkey primarily uses two data types for pure numbers:
In other words, scripts are affected by the following limitations:
Integers must be within the range -9223372036854775808 (-0x8000000000000000, or -263) to 9223372036854775807 (0x7FFFFFFFFFFFFFFF, or 263-1). Although larger values can be contained within a string, any attempt to convert the string to a number (such as by using it in a math operation) might yield inconsistent results.
Floating-point numbers generally support 15 digits of precision. However, converting a floating-point number to a string causes the number to be rounded according to the current float format, which defaults to 6 decimal places. If the "slow" mode of SetFormat is present anywhere in the script, numbers are always converted to strings when assigned to a variable.
Note: There are some decimal fractions which the binary floating-point format cannot precisely represent, so a number is rounded to the closest representable number. This may lead to unexpected results. 예를 들어:
SetFormat FloatFast, 0.17 ; Show "over-full" precision MsgBox % 0.1 + 0 ; 0.10000000000000001 MsgBox % 0.1 + 0.2 ; 0.30000000000000004 MsgBox % 0.3 + 0 ; 0.29999999999999999 MsgBox % 0.1 + 0.2 = 0.3 ; 0 (not equal)
One strategy for dealing with this is to avoid direct comparison, instead comparing the difference. 예를 들어:
MsgBox % Abs((0.1 + 0.2) - (0.3)) < 0.0000000000000001
Another strategy is to always convert to string (thereby applying rounding) before comparison. There are generally two ways to do this while specifying the precision, and both are shown below:
MsgBox % Round(0.1 + 0.2, 15) = Format("{:.15f}", 0.3)
AutoHotkey uses the same set of rules for naming various things, including variables, functions, window groups, GUIs, classes and methods:
CurrentDate는 currentdate와 동일합니다. However, uppercase non-ASCII characters such as 'Ä' are not considered equal to their lowercase counterparts, regardless of the current user's locale. This helps the script to behave consistently across multiple locales.스타일 관례 때문에, 일반적으로 변수는 기호와 숫자 그리고 밑줄 문자만 사용하는 편이 더 좋습니다 (예를 들어: CursorPosition, Total_Items, 그리고 entry_is_valid). 이 스타일을 사용하면 다른 언어에 친숙한 사람들이 오토핫키 스크립트를 더 쉽게 읽을 수 있습니다.
변수 이름을 전적으로 숫자로 구성할 수도 있지만, 이것은 일반적으로 들어오는 명령어 줄 매개변수에만 사용됩니다. 그런 숫자 이름은 표현식에 사용할 수 없습니다. 왜냐하면 변수가 아니라 숫자로 인식되기 때문입니다. It is best to avoid starting a name with a digit, as such names are confusing and will be considered invalid in AutoHotkey v2.
As the following characters may be reserved for other purposes in AutoHotkey v2, it is recommended to avoid using them: # @ $
Property names in classes have the same rules and restrictions as variable names, except that the three characters listed above (# @ $) are not allowed. Although they can be used in a method definition, calling such a method requires using square brackets. For example, myObject.@home() is not valid, but myObject["@home"]() is acceptable.
Variables have certain attributes that blur the line between a variable and its value, but it is important to make the distinction. In particular, consider objects and ByRef parameters.
Although we may say the variable myArray contains an array (which is a type of object), what the variable contains isn't the array itself but rather a reference or pointer to the array. Any number of variables can contain a reference to the same object. It may be helpful to think of a variable as just a name in that case. For instance, giving a person a nickname doesn't cause a clone of that person to come into existence.
By default, variables are passed to user-defined functions by value. In other words, the value contained by the variable is copied into the variable which corresponds to the function's parameter. ByRef parameters allow you to pass a variable by reference, or in other words, to make one parameter of the function an alias for your variable, allowing the function to assign a new value to your variable.
Because a variable only ever contains a reference to an object and not the object itself, when you pass such a variable to a non-ByRef parameter, what the function receives is a reference to the same object. This allows the function to modify the object, but it does not allow the function to modify the variable which the function's caller used, because the function only has a reference to the object, not the variable.
Scripts interact with an object only indirectly, through a reference to the object. When you create an object, the object is created at some location you don't control, and you're given a reference. Passing this reference to a function or storing it in a variable or another object creates a new reference to the same object. You release a reference by simply using an assignment to replace it with any other value. An object is deleted only after all references have been released; you cannot delete an object explicitly, and should not try.
ref1 := Object() ; Create an object and store first reference ref2 := ref1 ; Create a new reference to the same object ref1 := "" ; Release the first reference ref2 := "" ; Release the second reference; object is deleted
If that's difficult to understand, try thinking of an object as a rental unit. When you rent a unit, you're given a key which you can use to access the unit. You can get more keys and use them to access the same unit, but when you're finished with the unit, you must hand all keys back to the rental agent. Usually a unit wouldn't be deleted, but maybe the agent will have any junk you left behind removed; just as any values you stored in an object are freed when the object is deleted.